... Funny Name, Good Tools

Instagram

Interested in any of these tools?
Please have a look at my Terms and Ordering Procedure s


New Tools Were Last Added: 2019-07-12 (newest items on top)

Update 2019-07-12 Hi Folks- one last update for the week.. I added a bunch of early Ken Roberts and Eric Sloane books. I hope everyone has a nice weekend! Thanks for stopping by. --Josh


Tools are organized into the following categories:


Molding PLanes For Sale



3/4in American Side Bead Molding Plane.
This plane was made by Matthew Crannell in Albany in the mid-1800s. It's completely usable with some wear along the step. The boxing is long and straight and the blade is perfect and barely used. A good usable example for medium to large sized moldings.
Left-Over and Reduced to: $15
Item Number mp3803
Click Here For More Photos



American 3/4in Side Bead Molding PLane.
This plane is marked "H. Adams, New York" The mark appears in AWP-IV where it receives (***) for rarity. It's speculated that Adams was a tool merchant who sold planes marked by Auburn. The plane is in very good condition overall with no damage, just light wear. It's entirely usable
Left-Over and Reduced to: $15
Item Number mp3813
Click Here For More Photos



A. Mathieson 3/4in Side Bead Molding Plane.
This is a clean, crisp example in excellent condition. It's one of the most common sizes I find in vintage side beads. This one is superbly made and has a perfect blade. The only flaw is some light wear to the top of the wedge. An excellent example
Left-Over and Reduced to: $15
Item Number mp3816
Click Here For More Photos



High Quality 7/8in Side Bead Molding Plane.
This plane was made by W. Sarjent in Reading, England. It's a well-made plane with double-boxing and a York pitch blade. The plane is clean and crisp with no damage. The blade is in excellent condition. It's completely usable.
Left-Over and Reduced to: $20
Item Number mp3818
Click Here For More Photos



Excellent 5/8in Side Bead Molding Plane.
This plane was made by H. Chapin for Dillworth & Branson, a Philadelphia hardware dealer in the late 19th century. The plane is in excellent condition and perfectly usable. It's a good example of one of the most common size side beads I find.
Left-Over and Reduced to: $18
Item Number mp3827
Click Here For More Photos



Beautiful 7/8in American Side Bead Molding Plane.
This plane was made in New York by Cornelius See work worked in and around New York City in the first half of the 19th century. The plane is in excellent condition and has the bold federal eagle mark at the toe that is documented as mark "A" in AWP-V. A nice example in a large size for house moldings
Left-Over and Reduced to: $18
Item Number mp3830
Click Here For More Photos



Excellent M. Opeland 7/8in Side Bead Molding Plane.
This plane has seen very little use and remains in outstanding condition with no flaws. A great plane to put to work if you need to cut large beads for house moldings
Left-Over and Reduced to: $20
Item Number mp3837
Click Here For More Photos



American 7/8in Side Bead Molding Plane.
This plane was made by Way & Sherman in Albany in the late 1840s/early 1850s. The plane is essentially unused with a factory-new blade and perfect boxing. The wedge has a repaired crack, the only flaw. A perfectly usable plane in a larger size for house moldings
Left-Over and Reduced to: $18
Item Number mp3839
Click Here For More Photos



Excellent 3/4in English Side Bead Molding Plane.
This plane was made by C. Nurse in London. It's in excellent condition with a perfect blade. The blade is bedded at cabinet pitch to help with working difficult hardwoods. It shows little use and remains in excellent working order. A good example to use for medium to larger house moldings.
Left-Over and Reduced to: $20
Item Number mp3840
Click Here For More Photos



3/4in British Side Bead Molding Plane.
This plane was made by Gardner in Bristol, England likely in the 1840s. It's clean and crisp with only light wear. The blade is especially nice, completely clean and lapped. It's a good usable example in a larger size for big moldings and house moldings.
Left-Over and Reduced to: $20
Item Number mp3849
Click Here For More Photos



3/4in British Side Bead Molding Plane.
This plane was made by G. Popple in Sheffield, England. It has a cabinet pitch blade especially suited to working in hardwoods. It's clean and crisp with only light wear. The blade is especially nice, completely clean and lapped. It's a good usable example in a larger size for big moldings and house moldings.
Left-Over and Reduced to: $20
Item Number mp3850
Click Here For More Photos



3/4in British Side Bead Molding Plane.
This plane is unmarked but otherwise in near-perfect condition. The blade and boxing are flawless. The body shows only very light wear. A perfectly usable plane for cutting house moldings.
Left-Over and Reduced to: $22
Item Number mp3883
Click Here For More Photos



Top Quality 5/8in Side Bead Molding Plane by DENISON.
This plane was made by JL Denison, the planemaking partnership working out of Winthord, CT ca. 1832-40. The plane is a high quality tool with a fully boxed profile, an expensive upgrade for a plane of this size. The hammerhead boxing is full and dead-straight. the plane itself is clean and free of damage. The blade is clean and long. It's a good medium size bead for larger moldings, casings, etc.
$28
Item Number mp3966
Click Here For More Photos



Ohio Tool Co 1in Wide Quirk Ogee and Bevel Molding Plane.
this plane cuts a 1in wide by 3/8in deep quirk ogee and bevel molding. It's a good medium-sized example of this very common and ubiquitous molding. It has seen use but remains in very good working order. The blade is long and clean, the boxed quirk dead on straight. There is evidence of an auxiliary strip added to the fence to make it easier to register at the proper spring angle on the work. It's a very nice, perfectly usable,example of this very useful molding plane.
$35
Item Number mp3959
Click Here For More Photos



7/8in Dado Molding Plane.
This plane cuts a 7/8in wide dado across the grain. It was made by the Owasco Tool Company of New york. It's in excellent condition and should work perfectly. The depth stop is functional. Both the blade and nicker are long and clean. A fine worker in a useful size for larger cast, cabinet, and chest projects.
$35
Item Number mp3943
Click Here For More Photos



7/8in Dado Molding Plane.
This plane cuts a 7/8in wide dado across the grain. It was made by Ohio Tool Company. It's in excellent condition and should work perfectly. The depth stop is functional. Both the blade and nicker are clean. the nicker is on the short side but still functional. the plane body is crisp and clean with nice sharp corners. A fine worker in a useful size for larger cast, cabinet, and chest projects.
$35
Item Number mp3944
Click Here For More Photos



Decent 1/4in Side Bead molding Plane by JG GRAVES, Sheffield.
It's one of the most popular sizes I'm asked for today and one of the hardest to find in good shape. This plane has seen some use- The blade is worn and needs to be ground and honed. The boxing is slightly worn but still dead on straight. It's usable, but not the best.
$24
Item Number mp3313
Click Here For More Photos



Exceptional American 5/8in Side Bead Molding Plane.
This plane was made by B.F. Berry, a Watertown, NY planemaker working in the first half of the 19th century. The plane is as clean and crisp as they come, showing no evidence of use. It's perfectly usable and a good medium size for moldings.
$24
Item Number mp3808
Click Here For More Photos



Excellent 3/4in American Molding Plane.
This plane was made by J&W Webb in New York ca. 1840. It's especially clean and crisp with a near-perfect blade. It'll make an exceptional worker in a larger size for house moldings
$24
Item Number mp3941
Click Here For More Photos



3/4in American Side Bead Molding Plane.
This plane was made near Hartford, CT by Chapin-Stephens, sucessors to H. Chapin. It is exceptionally clean and crisp with no flaws. It's one of the most common sizes I find, an one that I get the least demand for, unfortunately. The price does not reflect the quality, just the lack of demand.
$20
Item Number mp3924
Click Here For More Photos



7/8in American Side Bead Molding Plane.
This plane was made in Albany, NY by the partnership of Bensen and Crannell. The firm operated in the mid-19th century from 1843-62 and was a prolific maker. The plane cuts a larger 7/8in side bead for house moldings and the like. It's seen little work and is in excellent condition overall.
$22
Item Number mp3897
Click Here For More Photos



Copyright (c) Joshua Clark 1997-2018