Tools for Sale

This is an unused, factory-new, replacement blade for a Lie-Nielsen no. 112. It's very handy to have an extra if you want to keep working without resharpening or experiment with different angles. Retail price is $75 new $55

If you have a vintage coping saw that requires loop-end blades you know how hard these are to locate. This is a new-old-stock package of 12 blades. They have some discoloration, but they are sharp and usable. $15

This tote fits a no. 5 or larger plane with a front screw. These totes are nearly indestructible, well suited for hard work. $24

This tote fits a no. 5 or larger plane with a front screw. These totes are nearly indestructible, well suited for hard work. $24

This blade is in near-new condition. It would fit a no. 3, 5 1/4, etc. Retail price is $60 new $50

This O1 tool steel blade fits in a Veritas flat or round spokeshave.It retails for around $22 new today $12

This tote fits a no. 4 or similar plane without a front screw. These totes are nearly indestructible, well suited for hard work. $24

This tote fits a no. 4 or similar plane without a front screw. These totes are nearly indestructible, well suited for hard work. $24

This tote fits a no. 4 or similar plane without a front screw. These totes are nearly indestructible, well suited for hard work. $24

This is a new ECE plane blade roughly 6 1/2in long by 1 7/8in wide. It's still in its original wrapper. It looks like the blade used by their block plane only much longer and wider. It would not work with a Bailey pattern plane. I figure someone out there could use this. $10

This is an unused blade for a cooper's howel made by Buck in Milbury, MA. It's 1 1/4in wide. $24

This plane is in excellent condition, sharp and well cared for. It fits the no. 60 1/2 and retails for $50 new. $30

This blade is a proper replacement for an infill panel plane. It's 2 1/2in wide, 3/16in thick, and 6 3/4in long overall. It has a nice clean back with minimal pitting. A solid worker with lots of life left in it. $35

This blade is a proper replacement for an infill panel plane. It's 2 1/2in wide, 3/16in thick, and 7in long overall. It has a nice clean back with no pitting. It's an exceptional example of this hard to find blade. $40

This is a true spoon bit with a wooden shank for sue in a pod brace $10

This blade is 2 1/4in wide, 6 1/2in long and a uniform 3/16in thick. It's a hard to find proper replacement for an infill smooth plane. $40

Six replacement blades in their original packaging. They were made by the Evans Rule co of Elizabeth, NJ. $15

Six replacement blades in their original packaging. They were made by the Evans Rule co of Elizabeth, NJ. $15